LW-W9 Digital RGB Color controller. The Digital RGB Controller is able to control Digi-Flex RGB Strip via DMX or button controls on the controller.

The Digital Digi-Flex RGB Strip can do all of the color effects of the regular RGB but is also able to chase color since there is a IC chip every 3 LEDs. With digital, one can connect (add a roll) up to 30 rolls without a signal repeater making setup easier when longer runs are required. With a optional DMX board the functions of the controller can be controlled VIA DMX board.

Digital LED RGB KIT includes:

MTR72DAUL-1250B (12VDC)
60 WATT Class TWO TYPE POWER SUPPLY 12VDC 5 AMP

FSB-5050-5M-150-12V-RGBD Flex Strip:
12VDC 5060 SMD RGB LEDs, 3 led per circuit with IC every 3 LEDs. 5 meters roll (16.4 feet max), Silicon cover, 150 LEDs per roll, 2.2 watts per foot, 3-amps per roll max. Connectors at end wire at end.

LW-W9 Digital RGB Color controller

o    Working temperature: -20-50

o    Max Amps total: 5 amps

o    Supply voltage: 12 (ONLY ONE EACH ROLL)

o    Meets DMX512(1990) protocol.

o    Can be used as a DMX512 Decoder.

o    An LCD screen shows the controller's current working status.

o    20 normal color changing patterns, and 1 DMX operating mode.

o    32 grayscale levels

o    60 speed adjustment levels, for dynamic color changes

o    Automatic parameter memory storage

o    1 XLR3 Male port and 1 XLR3 Female port

o    Aluminum housing with black wire brush finish

o    For Indoor use only (Dry Area)