|


Questions?
1-800-387-4081
Call, we can help!
|
|
| |
VERTICAL LED
STRIP:
LED
STRIP LIGHTING is a low voltage (12 volt) super
bright LED lighting in a solid thin strip with vertical LEDS. Designed for the lighting
professional, this lighting is ideal for
sign letter light, logos, signboards, and is especially suits for small channel letter.Vertical LED STRIP has 5mm LED as its luminous body which is of
high intensity and large beaming angle. Three LEDS make one series and each group can be cut according to the length requirement. Pins are set on every 6 LEDS which enable the strip be connected easily even after cutting.
Available color: Red, Yellow, Blue, Green, White, Warm White. This
product can be widely used for indoor decoration, logos, signboards, and is especially suits for small channel letter. It's small size and low voltage makes this lighting ideal for a wide range of applications.
Applications
Architectural decorative
lighting .
Use indoors to highlight
areas.
Concealed lighting
Channel letter lighting
Features
Available in 12 volts.
Very Bright & Low power
Consumption of LEDS.
Little or no heat.
Can be cut to size at
marked intervals.
Operating temperature: -10
0C ~ 40 0C
Long life span of LED
lights, 40,000 hours+
Continuous length flexible
LED light strips Solid-state, high shock /
vibration resistant
|
 |
|
|
 |
|
Specification:
Part No.:IMG-R18X
LED Spacing: 16mm
Weight: 13g
Each Strip Size: 300mm x 15mm
Maximum connection of strips: 24
Required Power supply: 30W-12V-2.5A DC regulated.
Cut-able at marked 3 LED intervals (line) 50mm |
|
 |
|
|
|
|
VERTICAL LED STRIP - 12VDC Specification: |
-
PART NO
|
-
MAX VOLTS
|
Watts /
Strip |
- Current
mA / 3 LED
|
Current
mA Strip |
-
LED QTY
-
/ STRIP
|
-
COLOR
|
-
View
-
Angle
|
-
LED
Spacing
|
-
L*W*H (mm) STRIP
|
-
PRICE
PACK
20 PCS
|
|
R18W |
12VDC |
1.1 |
15 mA*6 |
90 mA |
18 |
COOL WHITE |
100 |
16mm |
300 X 8 |
$99.00 |
|
|
Install fuse between power supply and VERTICAL LED STRIP to avoid damage or
hazards.
This product is for industrial use only for installation by locally licensed electricians, engineers and electrical professionals. Advance wiring and soldering skills required. Sold in packs only. Specifications subject to change without
notice. Note: 1 inch = 25.4mm |
|
|
|
|
|
|
|
- Caution:
- To ensure the longevity and stability do not curve it at the diameter below 60mm. No folding.
- The Min. bending radius is 60mm. The light and all its components can not be
mechanically pressed.
- During installation, do not damage the printed circuit.
- Only qualified electrician
or engineer can perform installation. Correct polarity is
imperative.
- Parallel connection only.
-
Keep away from flammable materials.
- Safety fuse is required per reel (fast type).
- When install on conductive surface, needs
isolation point between light and surface.
- Damage from corrosion is NOT subject to material defect claims.
- Voltage must not exceed
12VDC and must be regulated.
- For professional and
commercial use only.
- Never power if damaged.
- Static electricity will damage LEDS!
- Make sure the output voltage of power supply is of the same for the Vertical Flex Strip as the operating voltage (12vdc Max).
|
|
|
VERTICAL LED STRIP:
is for commercial use and sale only. Qualified trades people
that are familiar and knowledgeable with general construction
and electrical installation techniques should only do the
installation. Licensed electricians should provide all
installation and hook-up of both the primary input and secondary
outputs of the Power Supply. All installation and hook-up should
be done in accordance with all national and local codes.
Transformers that may be required should be provided by the
licensed electrician in accordance electrical codes and laws. |
|
|
Copyright © All Rights Reserved. Reproduction in whole or in part in any form or medium without expressed written permission of Santa’s Lites Display Ltd is prohibited. We are not responsible for errors or omissions regarding products on this site. Specifications and prices are subject to change without notice. Noted trade marks are owned by there registered company. Updated
Saturday March 14, 2009 |
|
Notice:
Specification subject to change without notice. |
 |
|
|